User`s manual

Temperature Controller MODBUS SIO Driver
GP-Pro EX Device/PLC Connection Manual
34
 Device Setting
To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific
Settings ] of [Device/PLC Settings ].

Settings of External Device
Use the address setting switch on the front of the Temperature Controller and the DIP switch inside the
Temperature Controller for communication settings of the External Device.
Please refer to the manual of the Temperature Controller for more details.
 Procedure
1. Use the address setting switch on the front of the Temperature Controller to set the module address for HOST
link.
The number added 1 to the set value becomes the module address.
2. Use the DIP switch inside the Temperature Controller to set the speed and the data bit configuration.
 Setting Value
Address setting switch
DIP Switch
High digit setting
0
Low digit setting
0
DIP Switch Settings Description
1ON
Speed
2OFF
3ON
Data bit configuration4OFF
5OFF
6 ON Protocol selection
7OFF
Fixed
8OFF
• Parameters to be set vary depending on the Temperature Controller. Please refer to the manual of
the Temperature Controller for more details.