Instruction manual

3. SETTING FOR COMMUNICATION

IMCB03-E5

3.4 Communication speed setting

Set a communication speed of 2400 bps, 4800 bps, 9600 bps or 19200 bps by using numerals from 0

to 3. Press the UP or DOWN key to change the numeral.

Symbol Name Setting range Description

Factory set

value

Communication

speed

0 : 2400 bps

1 : 4800 bps

2 : 9600 bps

Selects the communication

speed.

bPS

3 : 19200 bps

Set the same communication speed to both the controller and connecting host computer.

When the communication parameter was changed, always turn on the power again.

Otherwise, no communication is performed by using the changed value.

If key operation is not performed for more than 1 minute without pressing the SET key

after the communication speed is set, the controller is automatically changed to PV/SV

display mode. In this case, the set communication speed returns to the value before the

setting is changed.

!"!"

Setting procedure

Example: When setting communication speed to "1: 4800 bps."

1. Change the controller to communication setting mode, and then display the communication

speed (See P. 5, 6).

CAUTIONS

Communication speed

SET

R/S

ALM2ALM1AT OUT2OUT1