Installation guide

GP-PRO/PBIII for Windows Ver. 6.1 PLC Connection Manual
Chapter 12 - Indicating Controllers
12-4-1
12.4 RKC INSTRUMENT INC. Controllers
Controller Cable Diagram GP/GLC/LT
RS-422(2-wire)
(Cable Diagram 3)
RS-422(2-wire)
1:n connection
(Cable Diagram 5)
CB100 Z-1021
CB400 Z-1021
CB500 Z-1021
CB700 Z-1021
CB900 Z-1021
(Applicable for Modbus Protocol)
GP Series
GLC Series
LT Type H
The following describes the system configuration used when connecting the GP/
GLC/LT to an RKC Controller.
• GP/GLC/LT’s System Area (LS0 to LS19) Settings
The GP/GLC/LT’s system area (20 words) cannot be allocated to
the Controller’s own data area. When you are entering the sys-
tem area settings via the screen editor software or via the GP/
GLC/LT’s OFFLINE screen, be careful that you do not use the
Controller’s own data area.
CB Series (Modbus protocol)
12.4.1 System Structure
!!
!!
!
Important
12.4 RKC INSTRUMENT INC. Controllers