Installation guide

GP-PRO/PBIII for Windows Ver. 6.1 PLC Connection Manual
Chapter 12 - Indicating Controllers
12-4-33
12.4 RKC INSTRUMENT INC. Controllers
LE100 Series (RKC protocol)
REX-F Series (RKC protocol)
Baud Rate 9600bps Baud Rate 9600bps
Data Length 7bits DataLength 7bits
Stop Bit 2bits Stop Bit 2bits
Parity Bit odd Parity Bit odd
Data Flow Control ER(Fixed)
Communication Format
When using RS-232C
RS-232C
RS-422(4-wire)
RS-422(2-wire)
Unit No. 0~31 Device Address 0~31
GP/GLC/LT Settings Controller Settings
Communication Format
When using RS-422
• The Controller’s device address number range is from 0 to 99 for
the REX-F Series units. Use only from 0 to 31 on the GP/GLC/LT.
!!
!!
!
Important
• The Controller’s device address number range is from 0 to 99 for
the LE100 Series units. Use only from 0 to 31 on the GP/GLC/LT.
!!
!!
!
Important
Baud Rate 9600bps Baud Rate 9600bps
Data Length 8bits Data Length 8bits
Stop Bit 1bit Stop Bit 1bit
Parity Bit None Parity Bit None
Data Flow Control ER(fixed)
Communication Format
When using RS-422
RS-422(2-wire)
Unit No. 0~31 Device Address 0~31
GP/GLC/LT Settings Controller Settings