Installation guide

GP-PRO/PBIII for Windows Ver. 6.1 PLC Connection Manual
Chapter 12 - Indicating Controllers
12-4-17
12.4 RKC INSTRUMENT INC. Controllers


SRX Series
Device Bit Address Word Address
00000~03FFF 0000~03FF
08000~0881F 0800~0881
10000~13FFF 1000~13FF
18000~1881F 1800~1881
Remarks
L/H
Device Bit Address Word Address
000000~3FFF 0000~03FF
04000~07FFF 0400~07FF
08000~0883F 0800~0883
10000~13FFF 1000~13FF
14000~17FFF 1400~17FF
18000~1883F 1800~1883
Remarks
L/H


SRV Series
• GP unit internal processing allocates 1024 words to each
device. For this reason, the following features, which re-
quire more than one block, cannot be used. When wish-
ing to use these functions, be sure to set them up so that
they do not exceed one block.
1) Specifying the read area.
2) Specifying an a tag.
3) 2-Way block read/write (Pro-Server, GP-Web etc).
ex. In Pro-Server, it is not possible to perform a block-
read of 20 words, starting from “03F9”.
• When a tag that will read controller discontinuous ad-
dresses is placed on a screen, the GP unit groups the
addresses and does a block read of these addresses.
When this happens, a “Host Communication” error
(02:02:**) occurs in the GP unit where the discontinuous
addresses could not be read. (These addresses may have
been unusable by the controller.)
To prevent this, specify the screen editor’s [Options | Dis-
continuous Address Compensation Value] as 1. Also,
specify the read tag’s address interval as 2 words.
!!
!!
!
Important