Instruction manual

4. COMMUNICATION SETTINGS

IMCB14-E1

4.4 Communication Speed Setting

The communication speed of 2400bps, 4800bps, 9600bps or 19200bps is set with numbers from 0 to 3.

To change the number of the digit, press the UP or DOWN key.

Symbol Name Setting range Description

Factory set

value

Communication

speed

0 : 2400 bps

1 : 4800 bps

2 : 9600 bps

Select the communication

speed

bPS 3 : 19200 bps

Set the same communication speed for both the slave and the master.

When the communication parameter is changed, turn the power on and off again to refresh and

make the new value effective.

All communication speed settings must be stored by pressing the SET key. If changes are

made and the SET key is not pressed within one minute, the display will automatically return

to the PV/SV display mode and the communication speed will return to the value prior to set

change.







Setting procedure

Example: Setting the communication speed to 1: 4800 bps

1. Go to the communication setting mode so that slave address, Add, is displayed. Then, press the

SET key once, so the communication speed symbol, bPS, appears.

Communication speed

SET

R/S

ALM2ALM1AT OUT2OUT1