Instruction manual

1. TRANSFER TO MODE
2
IMCB04-E2
† Press the SET key to change to the next parameter. Thus, the data in initialization mode is unlocked.
SET
R/S
OUT1 OUT2
AT
ALM1
SV
PV
ALM2
CT1 input display
*In the above figure, the CT1 input is displayed. However, the parameter to be displayed varies
depending on the specification.
‡ Keep pressing both the SET and <R/S keys for 2 sec to change the instrument to initialization
mode.
Thus, the symbol (Cod) for selecting the initialize code is displayed first.
SET
R/S
OUT1 OUT2
AT
ALM1
SV
PV
ALM2
SET R/S
OUT1 OUT2
AT
ALM1
SV
PV
ALM2
CT 1 input display
Selecting and displaying initialize
code in initialization mode
Bright lighting :
Dim lighting :