Instruction manual

2. PROCEDURE FOR SETTING
IMCB04-E2
23
(5) AH1 (Differential gap setting of first alarm [ALM1] )
Not displayed when there is no first alarm (ALM1).
(SL4 setting : "0000" or SL11 setting : "
¨¨¨
0.")
[Setting range]
•
TC and RTD inputs : 0 to 100 or 0.0 to 100.0
‚
Voltage and current inputs : 0.0 to 10.0 of span
[Factory set value]
•
TC and RTD inputs : 2 or 2.0
‚
Voltage and current inputs : 0.2
(6) AH2 (Differential gap setting of second alarm [ALM2] )
Not displayed when there is no second alarm (ALM2).
(SL5 setting : "0000" or SL11 setting : "
¨
0
¨¨
.")
[Setting range]
•
TC and RTD inputs : 0 to 100 or 0.0 to 100.0
‚
Voltage and current inputs : 0.0 to 10.0 of span
[Factory set value]
•
TC and RTD inputs : 2 or 2.0
‚
Voltage and current inputs : 0.2
CAUTION
CAUTION