User Manual

SPRacingF3 http://seriouslypro.com - http://cleanflight.com Page 8

Firmware Upgrade

It is highly recommended that you immediately upgrade the firmware of the flight controller so that you have the

latest features and bug fixes. DO NOT FLY until you have installed the latest firmware.

1. Click the Firmware Flasher tab.

2. Select the latest SPRacingF3 stable release.

3. Select Manual baud rate.

4. Set the flashing baud rate to 256000.

5. Click ‘Load firmware [Online]’ and wait for firmware to download and read release notes.

6. Click ‘Flash Firmware’.

Troubleshooting

Q: It beeps continually.

A: Verify your RX is receiving data and your battery voltage monitoring is configured correctly.

Q: It have a problem not listed here.

A: Upgrade the firmware, try again, report issues via the forums - links are in the configurator on the ‘Documenta-

tion & Support’ tab

Q: I have no lights.

A: Check 5v supply.

Q: The activity light does not flash.

A: Follow recovery procedure in the configurator. Likely caused by flashing wrong firmware.

Q: Unable to connect and a repeating light sequence occurs on the activity LED.

A: Check the Cleanflight manual for how to interpret the error code (count the long flashes).