User`s manual
9
Setup Examples
The following diagrams show some of the many ways you can use your
Rack Gizmo in a guitar rig. Please check our web site for more examples.
INOUTINOUTINOUTINOUTINOUTINOUTINOUTINOUT
RJM Music Technology, Inc.
www.rjmmusic.com
Rack Gizmo Wiring Diagram
Rack Gizmo Wiring Diagram
4 pedals in front of the amp, 4 pedals in the amp’s loop, tuner
The guitar signal passes from the front panel jack, through the buer, then through the
rst 4 audio loops, through the Click Stopper circuit and into the amp’s input.
The last four loops are inserted into the amp’s eects loop. These can be either pedals
or rack units, but be sure to make sure the signal levels match between eects and
the amp.
The Rack Gizmo controls channel switching on the amp using one of the function
switching jacks.
Guitar connects to front panel input
From MIDI Controller Out
To Tuner
Footswitch Jack
Input
Amp
Return LOOP Send