User`s manual

then re-opening them. In momentary mode, the Switch Gizmo

switches will close for 100 milliseconds before opening again.)

To enter momentary mode, hold down the 3 button while powering

up the Switch Gizmo. Keep holding the button until the LEDs flash.

Use the front panel buttons to light the LED of any function that

needs to be momentary. Make certain that no other LED is lit.

Once you’ve selected the buttons for the momentary functions, press

the Write button. The Switch Gizmo is now in normal operational

mode and the momentary functions should operate correctly.

Factory Reset

You can return the Switch Gizmo to its factory default settings by

powering it up while holding the 1 and 4 buttons. Hold the buttons

until you see all of the LEDs light up then turn off. This process only

takes a couple of seconds. Once the factory reset completes, the

Switch Gizmo returns to normal operating mode with its newly

cleared settings.