User`s manual

MIDI bank select messages. When button 4 is on, the Switch Gizmo

will respond to Bank Select messages as described in the Bank

Selection section.

Saving MIDI Options

Once you’ve set the desired MIDI options, press the Write button. The

Switch Gizmo is now in normal operational mode.

Invert Mode

Some amplifiers may have inverted polarity on some functions. This

can cause the Switch Gizmo to display a function as off when the

function is actually on, and as on when the function is actually off. To

correct this, you must first switch the Switch Gizmo to invert mode.

Hold down the 2 button while powering up the Switch Gizmo. Keep

holding the button until the LEDs flash. You are now in invert mode.

While in invert mode, use the front panel buttons to light the LED of

any function that is inverted. Make certain no other LED is lit.

Once you’ve selected the inverted function’s associated button(s),

press the Write button. The Switch Gizmo is now in normal

operational mode, and the inverted functions should operate

correctly.

Momentary Mode

Some devices require momentary-type switching, rather than the

more common latching-type switches. (A momentary switch

changes OFF/ON state by closing its contacts for a short time and