User`s manual

10
Saving MIDI Channel
Once you’ve set the MIDI channel, press the Write button. The Switch
Gizmo is now in normal operational mode.
Selecting MIDI Options
A separate mode will allow you to select MIDI continuous controller
numbers and other options. Hold the 4 button while powering the
Switch Gizmo on. Keep holding until the LEDS flash.
Continuous Controller Ranges
The 1 and 2 buttons control the Continuous Controller range for all
switches:
CC Range
GCX
Number
Button 1
LED
Button 2
LED
80…83
1
OFF
OFF
88…91 (default)
2
ON
OFF
64…67
3
OFF
ON
56…59
4
ON
ON
GCX Compatibility Mode
Button 3 turns on GCX compatibility mode. This makes the switches
respond to MIDI commands like the GCX switcher, manufactured by
Voodoo Lab. In GCX compatibility mode, the switches respond only
to Continuous Controller messages on MIDI channel 16, regardless of
the MIDI channel setting. The GCX number is set by buttons 1 and 2
(see above).
Bank Select Enable
Button 4 controls whether or not the Switch Gizmo will allow MIDI
bank selection. When button 4 is off, the Switch Gizmo will ignore