User`s manual

2
Front Panel
Buttons 1 through 5 - These buttons turn audio loops 1 through 5
on and off. Each button lights up to indicate that the corresponding
audio loop is active.
Write – When held down for 3 seconds, this button saves the current
switch state to non-volatile memory. Buttons 1 through 5 will flash to
confirm that the state has been saved.
This function is not active until a Program Change message is
received at the MIDI In jack. See the MIDI Usage section for more
details.
The Write button is always lit up with a green LED to indicate that the
Mini Effect Gizmo is on.