User`s manual

5
MIDI In – Jack for incoming MIDI commands. Connect your MIDI foot
controller here using a 5-pin or 7-pin MIDI cable. The Mini Effect
Gizmo will phantom power a compatible MIDI controller if you use a
7-pin MIDI cable. The AC adapter provided with the Mini Effect
Gizmo can phantom power most MIDI controllers, provided the
controller accepts 9VDC at no more than 300mA.
Power – This unit requires power supply of 9 volts DC. The plug
should be a 5.5mm/2.1mm barrel connector, similar to those used in
most effects pedals. The Mini Effect Gizmo requires a minimum of
200mA of current.