User`s manual

44
corresponding to that preset. This parameter defaults to “None”, which means that the Mastermind GT will not respond
to incoming bank or program change messages.
Bank=Song – This setting affects what MIDI bank and Program Change messages do in Song and Setlist mode. Please
refer to the External MIDI Control section for more details.
MIDI Bidir – Turns bidirectional MIDI support on or off for the 7-pin DIN MIDI ports. Certain devices, including most RJM
Music products, support bidirectional communication between the device and MIDI controller. This allows you to have
two way communication with a single 5 pin or 7 pin MIDI cable. Don’t turn this parameter on unless you know your
device does support bidirectional MIDI. Bidirectional MIDI only works with the first device in your MIDI chain.
Remote – Turning this on enables remote mode. This allows more than one Mastermind GT to be connected together
and have them all synchronized together. Refer to the Remote Mode section for more information.
MIDI Merge – When set to “On”, all MIDI messages that are received through the Remote In or USB B ports are
retransmitted through the MIDI Out port.
MIDI Clock – Determines whether the Mastermind GT acts as a MIDI clock “Master” or “Slave”. Setting this parameter to
“None” (the default) disables MIDI clock support. See the Tap Tempo and MIDI Clock section for more details.