User`s manual
42
The last of the three buttons is not active when editing a Note action.
System
System actions are further defined by the Function parameter. The possible settings for Function, and their parameters
are as follows:
Page
The Page function makes the Mastermind GT switch to a particular button page when this button is tapped.
Page # - Selects the page number that should become visible when this button is pressed.
Tuner
The Tuner function turns on the tuner display when this button is selected.
Assign CC – This button allows you to choose a continuous controller from the list of functions defined for each device.
When this button is selected, you are prompted for a device, then prompted for one of the functions available on the
device (if any). The continuous controller number associated with that function is copied to this action.
Edit Presets
The Edit Presets menu lets you define which program change messages are sent to each device for the preset, as well as
the preset name, expression pedal settings and the current button page.
Name – Sets the name of this preset.
Tempo – Sets the tempo (in BPM) for this preset. A tempo setting of 0 (zero) indicates that this preset has no tempo
defined. See the Tap Tempo and MIDI Clock section for details.
Button Page – Sets the number of the button page that will be displayed when this preset is selected.
Exp Pedals – Brings you to the Expression Pedals menu to edit how the expression pedals operate on this preset.
The remaining buttons show any devices that are defined, and the bank and preset number that will be sent to those
devices when the preset is selected. Pressing one of these buttons allows you to change the bank and PC number for
the associated device.
Expression Pedals
The Expression Pedal menu allows you to edit the behavior of any of the four expression pedals. This menu can be
accessed from the Main Menu, which is where you set the global expression pedal settings. You can also enter this
menu from Edit Presets, which allows you to override the global settings for a preset.
Override – This parameter is only visible when editing the expression pedal settings for a particular preset (not from
the Main Menu). When editing a preset, turn this parameter On to override the global settings for this expression pedal.
The remainder of the settings below will be displayed so you can edit the expression pedal settings for the current
preset.
Name - Allows you to name this expression pedal.
Switch Grp – Assigns the pedal’s switch function to a button group. Setting this to a setting other than “None” will
allow the pedal to interact with other buttons in a group, switching off other buttons in the group when the pedal