User`s manual

16
Editing Presets
Each of the Mastermind GT’s 384 presets can send different MIDI Program Change messages to each of the connected
devices, making it a quick way to switch from one sound to another. By default, the Mastermind GT sends consecutive
program change numbers to each device. Selecting preset 1 sends program change 0 to each device, selecting preset 2
sends program change 1 to each device, preset 3 sends program change 2, etc. For devices such as effect processors,
you will probably need to customize the program change numbers so that the preset buttons call up your favorite
effect programs. To do this, you use the Edit Presets menu.
To edit presets, select the Edit Presets option from the main setup menu. You will be presented with a list of all of your
presets. You can use the Next Page button to move through the list.
Press one of the buttons and the Preset Edit menu is displayed. There are 16 buttons that show any devices that are
defined, and the program / bank numbers that are set to be sent to the device for this preset. A program number may
be displayed as a single number or as a pair of numbers (bank/program), depending on how the device handles bank
and program numbers.
1:Acoustic
Sim
2:Clean
Phase
Select a Preset
Done
Done
Next
Page
3:Harmony
Solo
5:Shred
5:Shred
6:Blues
7:Nasty
Flange
Name
Nasty Flange
Page
1
Edit Preset 7
Nasty Flange
Done
Done
Next
Page
Tempo
60
Exp
Pedals
Copy
Preset
1:Rack Gizmo
0/7
2:Mega FX
23
3:
-