User`s manual
14
Specifications
Dimensions
Standard 1U EIA rack enclosure
19 (W) x 1.75 (H) x 7.25 (D) inches
48.3 (W) x 4.5 (H) x 18.5 (D) cm
Weight
4 lbs, 4 oz
1.8 kg
Power
9VAC @ 450mA, 12VDC also acceptable
5.5mm OD, 2.5mm ID x 9.5mm barrel connector
Phantom Power
Provided over pins 6 and 7 of the MIDI In jack
Voltage provided is the same as power applied at the RG-16 power jack
9VAC, maximum 500mA current when using provided AC adaptor
Memory
256 programs, arranged in 2 banks of 128
Memory is non-volatile and requires no backup battery
Amp Connector Pinout
The RG-16 amplifier function switch connectors are female DIN-8 jacks. When a Function Switch is activated on the RG-
16, the corresponding pin is shorted to the connector’s ground (shield). Activating Function Switch 1 shorts pin 1 (as
numbered above) to the connector’s ground. Activating Function Switch 2 shorts pin 2, and so on. This happens on
both the Amp 1 and Amp 2 jacks. Please note that the amplifier jacks are not electrically connected to each other or to
any other part of the RG-16 circuit, so it’s safe to connect a different amp to each jack.
RJM Music produces a wide range of cables to allow the RG-16 to control various amplifier models. Please contact your
RJM Music dealer or the RJM Music web site to find the correct cable for your amp.
13
2
45
67
8