User`s manual

Setting the Control Change mode
To set the Control Change mode on the 444, press MIDI CHANNEL (5) for a long period of time until the
display (7) shows „0“ or „1“ with an additional decimal point in the lower right corner.
Note that in contrast to setting the MIDI Channel this action directly toggles the CC Mode, there is no way to
check the current setting first.
Control Change messages table
CC Controler Number Function Value
80 AMP 1 0=off, 127=on
81 AMP 2 0=off, 127=on
82 AMP 3 0=off, 127=on
83 AMP 4 0=off, 127=on
88 FX LOOP 0=off, 127=on
90 SAVE 127=save
104 CAB 1 0=off, 127=on
105 CAB 2 0=off, 127=on
106 CAB 3 0=off, 127=on
107 CAB 4 0=off, 127=on
User's Manual 444