User`s manual

CC8 - Continuous Controller #8

(CC value range: =000 - =127, Default value: 000)

Sets the value for the eighth Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/

Oﬀ to quickly toggle between the most commonly used values: =000 and =127.

Exiting Setup Mode

To exit Setup Mode, press and hold the 1 / Function Select button, then press the 3 / CC On/Oﬀ button, then release

both buttons. The MasterMind will return to normal operating mode and the Setup Mode indicator will stop ﬂashing.

It’s important to note that your changes are not saved until you exit Setup Mode. Be sure to exit Setup Mode before

removing power from the MasterMind.