User`s manual

FunC - Function Button
(MIDI Ch range: CH01 - CH16, CH-- (Function button disabled) , Default value: CH01)
(CC number range: c000 - c127, Default value: c000)
Sets the Continuous Controller message sent by the Function button for this preset. If bank support is enabled (see
Global Setup), c000 will be displayed instead as ban (bank). Setting this parameter to ban will enable the Alternate
Preset feature for this preset (see Alternate Presets section). Setting it to any other value will cause normal Continuous
Controller messages to be sent. Press 2 / Program/CC Number to select the Continuous Controller number, press 5 /
MIDI Ch to select the MIDI Channel.
PDL - Expression Pedal
(MIDI Ch range: CH01 - CH16, CH-- (Expression pedal disabled) , Default value: CH01)
(CC number range: c000 - c127, Default value: c007)
Sets the Continuous Controller message sent by the Expression Pedal for this preset. Press 2 / Program/CC Number to
select the Continuous Controller number, press 5 / MIDI Ch to select the MIDI Channel.
CC1 - Continuous Controller #1
(CC value range: =000 - =127, Default value: 000)
Sets the value for the first Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/Off
to quickly toggle between the most commonly used values: =000 and =127.
CC2 - Continuous Controller #2
(CC value range: =000 - =127, Default value: 000)
Sets the value for the second Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/
Off to quickly toggle between the most commonly used values: =000 and =127.
CC3 - Continuous Controller #3
(CC value range: =000 - =127, Default value: 000)
Sets the value for the third Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/Off
to quickly toggle between the most commonly used values: =000 and =127.
CC4 - Continuous Controller #4
(CC value range: =000 - =127, Default value: 000)
Sets the value for the fourth Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/
Off to quickly toggle between the most commonly used values: =000 and =127.
CC5 - Continuous Controller #5
(CC value range: =000 - =127, Default value: 000)
Sets the value for the fifth Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/Off
to quickly toggle between the most commonly used values: =000 and =127.
CC6 - Continuous Controller #6
(CC value range: =000 - =127, Default value: 000)
Sets the value for the sixth Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/Off
to quickly toggle between the most commonly used values: =000 and =127.
CC7 - Continuous Controller #7
(CC value range: =000 - =127, Default value: 000)
Sets the value for the seventh Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/
Off to quickly toggle between the most commonly used values: =000 and =127.
15