User`s manual

Programming an Alternate Preset is very similar to normal programming:

1. On the MasterMind, select a bank number (if needed), then select a preset number.

2. Press the Function button to select the Alternate Preset. An “A” should appear at the left side of the display.

3. On the device you wish to control, use the front panel buttons to select which functions, loops, etc., you wish to

have active for this alternate preset.

4. On the device you wish to control, hold down the Write button until its LEDs ﬂash.

Or, to program both a main preset and its alternate:

1. On the MasterMind, select a bank number (if needed), then select a preset number.

2. On the device you wish to control, use the front panel buttons to select which functions, loops, etc., you wish to

have active for the main preset.

3. On the device you wish to control, hold down the Write button until its LEDs ﬂash.

4. Press the Function button to select the Alternate Preset. An “A” should appear at the left side of the display.

5. On the device you wish to control, use the front panel buttons to select which functions, loops, etc., you wish to

have active for the alternate preset.

6. On the device you wish to control, hold down the Write button until its LEDs ﬂash.