Operating instructions

Rev 08/24/10 ENERGY KING™ Wood/Coal Boiler Owner’s Manual U. S. 3
Specifications
*The heating capacity specifications are provided as guidelines only and in no way guarantee the output or
capacity of the units. The actual BTU output depends on the type of fuel being burned and its condition, the
thermostat setting, the draft adjustments and the chimney into which the unit is installed.
Model Number A40EK-D 35EK-D 45EK-D
Dimensions (H x W x D) 54.5 x 24 x 43 54.5 x 24 x 38 54.5 x 24 x 43
Shipping Weight (Approx.) 1,155 lbs. 1,055 lbs. 1,155 lbs.
Heating Capacity* - BTU’s (Approx.) 140,000 BTU 140,000 BTU 160,000 BTU
Heating Area* (Approx.) 1,500–2,500 sq. ft. 1,500–2,500 sq. ft. up to 4,000 sq. ft.
Water Capacity (Approx.) 43 gallons 43 gallons 48 gallons
Water Jacket (Sides, Front, Top, Back)
1/4 SA516-70
Steel Plate
1/4 A36 Steel
Plate
1/4 A36 Steel
Plate
Burn Chamber Dimensions (H x W x D) 30 x 17 x 30 30 x 17 x 30 30 x 17 x 35
Burn Chamber Volume 8.5 cu. ft. 8.5 cu. ft. 10 cu. ft.
Log Length 26 26 32
Sliding Smoke Baffle Standard Standard Standard
Cast Iron Fuel Loading Door Size
(H x W)
15.5 x 13.5 15.5 x 13.5 15.5 x 13.5
Cast Iron Ash Removal Door Size
(H x W)
7.25 x 11.5 7.25 x 11.5 7.25 x 11.5
Removable Ash Pan Standard Standard Standard
Flue Size 8 8 8
Flue Collar Height 55.5 55.5 55.5
Leg Height 4 4 4
Insulated Cabinet Standard Standard Standard
Pre-wired Electrical Components Standard Standard Standard
Draft Controls Forced (60CFM) Forced (60CFM) Forced (60CFM)
Wall Thermostat Standard Standard Standard
Electrical Requirements
115 Volts, 60HZ,
1 Phase, less than
12 Amp Circuit
115 Volts, 60HZ,
1 Phase, less than
12 Amp Circuit
115 Volts, 60HZ,
1 Phase, less than
12 Amp Circuit
Cast Iron Stationary (Wood) Grates Standard Standard Standard
Cast Iron Shaker Grates Optional Optional Optional
Cast Iron Hearth Plates (Front & Rear) Standard Standard Standard
Domestic Hot Water Coil, 4
N/A
Optional Optional
Complies with Standards
ASME Code,
Section 4
N/A N/A