Operating instructions

Rev 08/24/10 ENERGY KING™ Wood/Coal Boiler Owner’s Manual  U. S. 32
Risk of electric shock. Disconnect power at the service
panel or breaker box before servicing the ENERGY
KING Wood/Coal Boiler.
Troubleshooting Guide
Many problems in the ENERGY KING Wood/Coal Boiler can be traced to a few commonplace
causes and are easily fixed. Before making any repairs or replacing any components, be sure to
check for these common problems:
Fuel
• Wet or Dirty fuel
Solution: Empty and clean the burn chamber. Refill using only high
quality, clean, dry fuel as outlined in Fuel Requirements.
Improper Draft
• Too little or too much draft
• Insufficient combustion air
Solution: Adjust the draft controls and observe until you determine
which settings are most appropriate for your usage. See Operation for
further information.
Ash buildup in the ash removal pan
Solution: Be sure to maintain your ENERGY KING Wood/Coal Boiler’s
cleanliness by emptying the ash removal pan regularly. See Maintenance
for further information.
We also recommend establishing a routine of inspecting gaskets and replacing when necessary.
Maintaining your ENERGY KING heating appliance’s cleanliness and adjusting the draft controls
will remedy many problems.