Legends Spec Coupe Kit Instructions

5246 3-PC FRONT AXLE PLATE
5247 REPLACEMENT OUTER ARMS (2)
5066 OFFSET FRONT ARMS FOR 5246
THESE ARE MADE TO REPLACE THE 5244 FRONT
AXLE PLATE. THEY ARE MADE IN THREE PIECES SO
THAT YOU CAN REPLACE ONE SIDE IF BROKEN
WITHOUT HAVING TO SPLIT THE CHASSIS SIDES TO
GET IT OUT. ALSO , YOU CAN TUNE YOUR CAR BY
MOUNTING THE OUTER ARMS ON TOP OR BOTTOM
OF THE CENTER PLATE, OR EVEN ONE SIDE ON TOP
AND THE OTHER ON THE BOTTOM.
INSTALL THE CENTER BY SPLITTING THE CHASSIS
AND REPLACING THE 5244 PLATE WITH THE CENTER
PLATE FROM THE 5246 KIT . YOU CAN THEN ADD THE
OUTER PLATES AS YOU WISH. USE 5-40 X 3/8 SCREW
(7030) AND 7207 LOCK NUT IN THE REAR HOLE IF
YOU ARE NOT USING A BODY POST ON THE PLATE
AND THE SUPPLIED 4-40 X 1/4 SCREW THRU THE
CENTER PLATE AND THREAD IT INTO THE OUTER
ARM.
OUR 5313 (NARROW HYBRID)
HUB IS AVAILABLE TO UP-
GRADE THE SET SCREW
SIDE.
OUR 5248 HEAT SINK CAN BE
ADDED BETWEEN YOUR MOTOR
AND THE CHASSIS PLATE TO
HELP IT RUN COOLER.
OUR 5250 LINKAGE KIT PROVIDES
MORE PRECISE STEERING AND CAN
BE ADJUSTED BY SNAPPING OFF
THE BALL CUPS AND THREADING
THEM FARTHER ON OR OFF THE
THREADED ROD. THE WIRE LINK
CAN BE RE-BENT TO SUIT MOST
MOUNTINGS.
www.rjspeed.com
1016 ‘34 F COUPE* 1017 ‘37 C SEDAN* 1018 ‘40 F COUPE 1035 ‘34 F SEDAN
1036 ‘37 F COUPE 1044 ‘37 F SEDAN 1045 ‘37 C COUPE 1046 ‘37 D COUPE
8 GENUINE LEGENDS BODIES TO CHOOSE FROM
ALL BODIES
SOLD CLEAR
UNPAINTED. USE
PAINT MADE FOR
LEXAN PLASTIC.
AVAILABLE ACCESSORIES
* KIT BODIES