RJS2014 RJ Speed Spec Modified Oval Kit Instructions

STEP 5 SLIDE THE OTHER 5074 CHASSIS FRONT ONTO

THE TABS AND RETAIN WITH TWO 3/8 CHASSIS SPACER

SCREWS AND THE 5076 FLEX PLATE WITH THE THINNER 3/8

SCREWS FROM IT’S BAG.

STEP 6 ATTACH 3- 5245 CHASSIS SPACERS TO ONE OF

THR 5075 CHASSIS REARS.

STEP 5

STEP 6

STEP 7

STEP 7 ATTACH THE CHASSIS REAR ASSSEMBLY TO THE

FLEX PLATE WITH TWO SCREWS FROM THE FLEX PLATE

BAG. SLIDE THE REAR MOUNT INTO THE SLOT AT THE TOP

OF THE CHASSIS REAR .

STEP 8

STEP 8 ATTACH THE OTHER REAR CHASSIS WITH 3

SPACER SCREWS AND TWO FLEX PLATE SCREWS.

AS BEFORE, MAKE SURE THE TABS IN THE FLEX PLATE

ARE ALL THE WAY IN AND DO NOT OVERTIGHTEN THE

SCREWS. IF YOU SHOULD HAVE A PROBLEM STRIPPING

ANY OF THE FLEX PLATE SCREWS, OUR 7030 SCREWS

AS USED IN THE CHASSIS SPACERS ARE SLIGHTLY LAR-

GER IN DIAMETER AND WILL THREAD IN TIGHTER.

STEP 9 ATTACH TWO OF THE BODY POSTS TO THE

BODY MOUNT WITH TWO 1/2” SCREWS AND TWO 1/8

THICK SPACERS. ALIGN THE BODY CLIP HOLES IN THE

DESIRED DIRECTION BEFORE TIGHTENING.

STEP 9

STEP 10 ATTACH THE 5066 FRONT ARM (SHORTER ONE) ON TOP

OF THE FRONT AXLE PLATE WITH A 7025 1/4” SCREW IN THE FRONT

HOLE FROM THE BOTTOM AND A BODY POST WITH A 1/2” SCREW

THROUGH BOTH PARTS.

STEP 10