User's Manual

Playback
function
Picture viewing and video playback
● Press and hold the M button to enter the main menu
● Press the UP/DOWN button to select the "Playback" function option.
● Press the M button to access the playback screen
● Press the UP/DOWN button to select the file, then press the M button
for full screen view
Defect-pixel
Correction
During camera use, defect pixels (such as bright or dark spots) may appear,
which need to be removed using the Defect-pixels Calibration function
● Press and hold the M button to enter the main menu
● Press the UP/DOWN button to select the Defect-pixel Correction option
● Press the M button to enter the defect-pixel correction interface
● Cursor movement direction (X-axis/Y-axis) and number of defective pixel
corrections are displayed on the lower-left corner by default
● Press the M button to change the movement direction, and press the
UP/DOWN button to move the cursor
● Press the PHOTO button to add a defective pixel, "Add" is displayed
● Undo defective pixel correction by pressing the PHOEO button again, “Del”
is displayed
● The number of defect pixels is displayed accordingly
● After the correction, press and hold the POWER button until a prompt is
displayed to confirm whether to save the correction or not. Select “Yes”
to save or “No” to cancel
Language
Setting the system language
● Press and hold the M button to enter the main menu
● Press the UP/DOWN button to select language
● Press the M button to enter sub-menu
● Press the UP/DOWN button to select the desired language
● Press the M button to confirm selection
Measurement
Units
Measurement units
● Press and hold the M button to enter the main menu
● Press the UP/DOWN button to select units
● Press the M button to switch units
Firmware
Update
Upgrade Firmware
● Press and hold M button to enter the main menu
● Press the UP/DOWN button to select the "Upgrade" function
● Press the M Button to automatically upgrade when new firmware is
available
Factory Reset
Restore factory default settings
● Press and hold the M button to enter the main menu
● Press the UP/DOWN button to select "Factory Reset"
● Press the M button to enter the secondary menu for restoring the factory
settings
● Press the UP/DOWN button to select Yes/No
● Press the M button to confirm. When “Yes” is selected, the thermal