Operator`s manual

Table Of Contents
Riverstone Networks RS 8000/8600 Switch Router Getting Started Guide 2-55
Introduction Hardware Overview
The following table lists the pin assignments for both the RJ-48c connector on the T1 WIC and the RJ-45 connector
on the E1 WIC.
The Multi-rate WAN line card and all WICs use the following LEDs:
Table 2-54 Specifications for Clear Channel E3 WIC card
Port-type Specification
Clear Channel E3
75-ohm coaxial BNC connectors
G.703, G.704, and 732 compliant
G.704 framing
HDB3, AMI
Table 2-55 Pin assignments for T1 and E1 WICs
WIC Line Card Connector Pin Number RJ-48c/RJ-45 Connector at
Other End of Segment
RXD 1 TXD
RXD 2 TXD
reserved 3 reserved
TXD 4 RXD
TXD 5 RXD
reserved 6 reserved
reserved 7 reserved
reserved 8 reserved