Specifications

Certified FCIP Vendor Products
96 Continuous Access and Data Replication Manager SAN Extensions Reference Guide
SAN Valley Systems FCIP gateway (SL1000) equipment fact
sheet
Vendor: SAN Valley Systems, Inc. http://www.sanvalley.com
SL1000-AC & SL1000-DC IP-SAN Gateway
HP product number: QS-SN105-HK
Certified on DRM, Continuous Access EVA,
and Continuous Access XP
Feature Specification
Supported hardware revision 04
Supported firmware revision 1.6.0
Product function Fibre Channel over IP gateway
Fibre Channel speed 1 Gbps full-duplex (200 Mbps)
Number of FC ports 4
FC buffer-to-buffer credits Supports 64 BB credits
FC optical interface 50-62.5 micron MM, 850 nm
FC optical connector MT-RJ
Ethernet speed (maximum) 1 Gbps (Gigabit Ethernet)
Ethernet interface 50-62.5 micron MM, 850 nm
Ethernet connectors MT-RJ
Number of Ethernet ports 4
Ethernet port load balancing No
IP protocol UDP
Power supply 2 power supplies per chassis
Input voltage, current SL1000-AC: Universal input 90-240 Vac, 50-60 Hz front power
entry
SL1000-DC: DC input voltage 36 V to 75 V, DC input current 2
Amps
Power dissipation 80 W
Hot-swap power supply No—but redundant power supplies
Hot-swap fans No—but redundant fans
Field Replaceable Units Entire unit
Out-of-band management
ports
10/100Base-T & RS232 serial port