Specifications

Certified FCIP Vendor Products
93Continuous Access and Data Replication Manager SAN Extensions Reference Guide
c. Click Apply, and then click OK. Check the right-most column in the
gateway port connection line to verify that the desired zones will be
exported. The Zone ID numbers should be listed there.
3. Repeat steps 1 and 2 for the remote IPS3300.
4. Save the new zoning configuration on each IPS3300 by returning to the
Element Manager for each IPS3300 and choosing Save Configuration on the
File menu.
5. Verify the zone/device exportation by returning to the Zone Configuration
window in each IPS3300 Element Manager, where a bold capital “R” should
appear superimposed on the icon of each zone and each device that has been
successfully exported across the fabric. If the Rs do not appear on the
zones/devices icons where expected, even after all connections have been
double-checked and the Zone Configuration has been refreshed (using the
Refresh button), the IPS3300 may require a reset. A reset is done either by
choosing Reset System from the Element Manager File menu or by
performing a hard reset.
For any additional details, refer to standard Nishan installation guidelines in the
IPS3000 Series Users Manual.