Specifications

Certified FCIP Vendor Products
81Continuous Access and Data Replication Manager SAN Extensions Reference Guide
For example:
(config/zone/wwn/zone)> madd FF EE DD CC BB AA 99 88 backupNT
(config/zone/wwn/zone)> madd 11 22 33 44 55 66 77 88
backupUNIX
■ To quickly select from the pool of members that already exist in the
zoning database (members have already been added to one or more
zones), use the following command:
define <ZoneName>
where ZoneName is the name of the zone.
Note: This method is recommended only as a shortcut once all potential members have
been previously added to the database, since the define command only allows
selection from a predefined list.
For example:
(config/zone/wwn/zone)> define backupNT
(Enter 0 to exit)
11 22 33 44 55 66 77 88 [N]:
FF EE DD CC BB AA 99 88 [Y]:
OptiStar EdgeSwitch Configuration
Storing zoneset information...
Do you wish to continue (Yes/No): [Y]
6. To place the zoning you have created into effect, you must activate a zoneset.
To activate a zoneset, go to the zoneset menu. Choose either 1) config 2)zone
3)wwn 4)zoneset or the shortcut config zone wwn zoneset) and type:
activate <ZoneSetName>
where ZoneSetName is the name of the zoneset.
For example:
(config/zone/wwn/zoneset)> activate Backup
At this command, the switch activates the zoneset on itself and then attempts
to force the zoneset onto other switches in the fabric (zone merge). After you
have entered this command, press the down arrow key to scroll to a message
that states “depress any key to cancel.”
Note: Pressing any key at this point, including the Enter key, will cancel the activate
command.