Technical data

Page 20/ 24 34-81 10/2013
11. HOT KEY PROGRAMMING
To upload program from control to HOT KEY:
To download program from HOT KEY to control:
If err message is displayed during upload or download the programming failed. The cause of a failed program may
be user error, faulty control or Hot Key.
+
Insert HOT KEY into the TTL/HOT KEY connection on the back of the control. Press
and keys together momentarily then press the key. The uPL
message will appear while uploading is occurring and the End message will appear
when finished. Push any key to return to normal operation.
ON/OFF
Press the ON/OFF key to turn off the control. Insert the HOT KEY into the TTL connection on the back
of the control. Press the ON/OFF key again and downloading will begin. The DoL message will appear
while downloading is occurring and the End message will appear when finished. Push any key to return
to normal operation.