Specifications

Riverside Hydronics
®
, LLC – 34-160 10/11
990 Haltom Road - Fort Worth, Texas 76117 - Tel [phone] Page | 25
The
OnTrac
®
touchscreen has a scratch resistant coating. This adds a slight chemical barrier to the
screen, but the coating’s primary purpose is to protect the screen from abrasion. The OnTrac
®
touchscreen should be cleaned as needed with warm, soapy water.
 The internal fuse does not require replacement. It is reset by removing power for 5 minutes and
then reapplying power to the unit.
 The external fuse is a MDA 1.0 amp/250V.
 Control – Microprocessor based Control with HMI (Human Machine Interface) and PID
 Enclosure – 16 gauge, powder coated steel cabinet with hinged front door access
 Dimensions - 12 3/4” H x 9” W x 7” D
 Weight - 12 LBS
 Approvals Electronic Hardware - UL, CUL, CE
 Approvals Assembly – ETL panel shop
 Environmental - 32 -122°F (0-50°C) 10-95% Non-Condensing
 External Power Supply – 24 VDC 1.0 Amp, Class 2 plugin transformer for 115 VAC source power
 Output Relays – 120 VAC with a Maximum switching current of 15 AMPS
 PLC Battery Backup - Lithium coin cell battery with 5 year life expectancy, with a low battery
indicator
CLEANING TOUCHSCREE
N
SPECIFICATION
S
FUSE
S