Owner manual

TREESTANDS
Page 3
HuntRiversEdge.com
10' Outpost
™
Tower w/ Blind Kit (RE703)
HuntRiversEdge.com
800-450-EDGE (3343)
4. Attach (4) leg receivers (TWR25) to the bottom four corners of platform
using (8) provided 1/4-20 x 2-1/2” bolts, locknuts and washers. SEE
FIGURE 2.
NOTE: Bolt heads should be inserted as shown in gures. This will help
prevent unnecessary wear or interference to the fabric blind.
5. Attach (2) blind uprights (TWR18) to the long sides of both platforms using
(2) provided 1/4-20 x 2-1/2” bolts, locknuts and washers. SEE FIGURE
3.
6. Attach remaining (2) blind uprights (TWR18) to the outside platform joiners
using (2) provided 1/4-20 x 2-1/2” bolts, locknuts and washers. SEE
FIGURE 4.
7. Attach (4) upright support flat bars (SL8) to the blind uprights and platform
using (8) provided 1/4-20 x 1-1/2” bolt, locknuts and (4) washers. SEE
FIGURE 3 & 4.
FIGURE 4
FIGURE 3
blind uprights
locknuts
washers
1/4-20 x 1-1/2" bolts
support flat bars
1/4-20 x 2-1/2" bolts
1/4-20 x 1-1/2" bolts
blind uprights
1/4-20 x 1-1/2" bolts
washers
locknuts
1/4-20 x 2-1/2" bolts
support flat bars
1/4-20 x 1-1/2" bolts
FIGURE 2
leg receivers
1/4-20 x 2-1/2" bolts
locknuts