TREESTANDS HuntRiversEdge.com TOWER INSTRUCTIONS 10' Outpost™ Tower w/ Blind Kit Model RE703 Maximum Height - 10' Maximum Field Rating - 500 lbs. HuntRiversEdge.com OMre703 Rev. 08/20/10 © 2010 Rivers Edge Treestands, Inc. All Rights Reserved.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS Rivers Edge Treestands are engineered with you the hunter in mind. We appreciate your purchase of one of our world class tower stands. Follow these few simple instructions and your stand will provide you many years of trouble-free pleasure. Instructions should be kept in a safe place and reviewed at least annually.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS 4. Attach (4) leg receivers (TWR25) to the bottom four corners of platform using (8) provided 1/4-20 x 2-1/2” bolts, locknuts and washers. See figure 2. 1/4-20 x 2-1/2" bolts NOTE: Bolt heads should be inserted as shown in figures. This will help prevent unnecessary wear or interference to the fabric blind. 5.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS 8. a. Insert (2) blind rim rails (TWR19) into (2) rail spanner tubes (TWR26) forming a square. Align the four holes and insert (4) provided 1/4-20 x 1-1/4” bolts, locknuts and washers. See figure 5. b. Assemble this square to the inside the four blind uprights by attaching (2) rail spanner tubes to the two blind uprights that are attached to the outside platform joiner using (2) provided 1/4-20 x 2-1/4” bolts, locknuts and washers.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS 9. Insert (2) rail extension tubes (TWR27) into the two blind uprights that are attached to the outside platform joiner using (2) provided 1/4-20 x 1-1/4” bolts, locknuts and washers. See figure 7. 10. Insert blind roof rail (TWR28) into the two blind uprights that are attached to the long side of both platforms using (2) provided 1/4-20 x 1-1/4” bolts, locknuts and washers. See figure 7. 11. a.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS 12. Attach foot pads (TP113) to four of the eight leg sections (TWR20) using (4) provided 1/4-20 x 1-1/2” bolts and locknuts. See figure 8. This step now makes these four legs, the bottom section legs. NOTE: Be sure foot pads are oriented correctly in relation to the welded on bracket of leg section. Channel on foot pads should touch on three sides of the leg sections. See figure 8. 13.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS male cross braces 15. a. Locate the (8) male cross braces (TP132) and the (8) female cross braces (TP131). Insert the male cross braces into the female cross braces. female cross braces locknuts b. Using (8) provided 1/4-20 x 1-1/4” bolts and locknuts, secure the cross braces in the hole location listed in FIGURE 9. When assembled together, all eight cross brace assemblies should measure approximately 88-3/4" from end to end.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS 17. a. Attach the opposite end of all four double flat braces to the wing bracket of each top leg section using (4) provided 5/16-18 x 1-1/4” bolts and locknuts. See figure 11. IMPORTANT NOTE: Be sure to use 1-1/4” bolts at any location where multiple cross brace poles are attached! b.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS 19. Assemble the (3) ladder sections on the ground in the following order: bottom section (AL1 ladder); second section (AL3 ladder); top section (TWR21 ladder). See figure 12. 20. With all ladder sections assembled together on ground, secure all sections together using (4) provided 1/4-20 x 1-1/4” bolts and locknuts. See figure 12. 21.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS 22. Attach assembled ladder to the platform using (2) provided 1/4-20 x 13/4” bolts and locknuts. See figure 13. Plate of top ladder section should be mounted on top side of platform. NOTE: Ladder can be bolted to long side of either platform, they are the same. 23. Attach the ladder assembly to the cross braces using the (2) provided U-bolts/backup plates/nyloc nuts and tighten securely.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS UPRiGHTING and use instructions 1. With assembled product lying on ground, position two people at feet end of tower laying on ground. These people have to prevent the bottom end from tilting up when platform end is lifted and prevent feet from skidding across the ground. 2. Position two people at platform end, lift platform end of tower and continue uprighting by walking toward feet end and moving hands along leg sections.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS INSPECTION AND MAINTENANCE SCHEDULE Warning For All Rivers Edge Products • • • • • • • • • • • • • • Inspect all webbing, rope, cord, and strap assemblies for wear or damage. Inspect cables and cable ends for damage or kinking. Inspect all hardware and chain components for damage. Inspect for any structural damage to product. (Return to factory for repair or discard product if any damage is found.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS Always… Warning • Be physically fit, mentally alert, and well rested before using this product. • Read and understand all instructions before use and save for future reference. • Be fully aware of foot placement. • Recommended for adult use only. • Inspect tower stand for missing parts, all hardware condition, and damage before every application, replace if necessary. • Remove tower stand after every use, store product indoors.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS tower stand PARTS 13 19 18 16 9 7 11 12 18 6 8 21 4 2 17 20 23 5 15 8 22 16 3 24 2 1 14 26 25 Page 14 800-450-EDGE (3343) HuntRiversEdge.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS tower blind kit PARTS 38 33 40 31 33 28 27 34 30 38 28 27 33 29 38 35 32 39 36 35 37 37 35 800-450-EDGE (3343) Page 15 HuntRiversEdge.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS tower stand PARTS LIST KEY # PART # DESCRIPTION QTY.
HuntRiversEdge.com 10' Outpost™ Tower w/ Blind Kit (RE703) TREESTANDS BOLT IDENTIFICATION CHART Not all bolt sizes shown are included with all treestands. Bolts shown are for size reference only. Extra hardware may be included in the parts bag.
HuntRiversEdge.
HuntRiversEdge.
ACCESSORY CHART & REPLACEMENT PARTS ITEM # DESCRIPTION MSRP* 48028 Blind Cover, Camo $72.39 RE758 Universal Pod Tie-Down Kit $44.99 Secures your ladder pod to the ground. Includes center ground auger, four stakes and cable. Fits most other brands also. * Prices shown do not include shipping & handling charges. All prices are subject to change without notice. When ordering from manufacturer, there is a $10.00 minimum order. For replacement parts, phone 1-800-450-EDGE (3343) or go online to www.
