Installation Instructions

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5

Operator's Manual

BOWMAN Ladder Stand

FIGURE 5

FIGURE 6

7. Assembly M6 bolt (20) into end of front seat tensioner (6),

screwing M6 bolt (20) all the way into front seat tensioner

(6). SEE FIGURE 5A.

8. Install front seat tensioner assembly (6 and 20) through

left tube and into right tube of Teartu seat assembly (15),

securing piece as shown using one 1/4-20 X 1-1/2 IN bolt

(23) and locknut (26). Use the provided allen wrench to

tighten M6 bolt (20) through hole in Teartu seat assembly

(15) to tension seat as desired. SEE FIGURES 5 AND 5A.

FIGURE 5A

6 20

FIGURE 6A

9. Assemble Teartu seat assembly (6, 15 and 20) to seat side

rails (11) using two 1/4-20 X 2-3/4 IN bolts (27), four yellow

plastic washers (18), two plastic spacers (19) and two

locknuts (26). SEE FIGURES 6 AND 6A.

NOTE: The order of the hardware is imperative for

proper assembly and function please reference

FIGURE 6A, it shows detail of the left side of the seat

assembly, and the correct hardware order.