Installation Instructions

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
13
Operator's Manual
LOCKDOWN WIDE 1-MAN Ladder Stand
FIGURE 13
FIGURE 14
20. Slide the stabilizer bar (1) into the stabilizer support
tube (23) and secure using a 1/4-20 x 1-3/4 IN wing
screw (37) and a wing nut (36). Make sure the screw
passes through the support tube and the stabilizer
bar at the appropriate hole to achieve the desired
distance from the tree. Adjustment in length may be
needed when ladder is uprighted later in the Setup
and Use Instructions.
21. Connect the stabilizer bar assembly (1) through the
middle ladder section with stabilizer slot (7). These
components will be connected using a 1/4-20 x 1-3/4
IN wing screw (37) and one wing nut (36).
SEE FIGURE 14
NOTE: Treestand should ALWAYS be fully assembled
on the ground prior to mounting it in the tree.
19. Ladder sections are assembled on the ground in the
following order: bottom ladder section (5), middle
ladder section with stabilizer slot (7), middle ladder
section (4), and the top ladder section (3) with the
treestand top assembly. Connect all sections
together using the six silent knob assemblies (26).
SEE FIGURES 13 AND 13A
1
23
36
37
37
36
stabilizer bar
hidden for clarity
26
3 4
7
5
FIGURE 3A
bottom
ladder
section
middle
ladder section
with stabilizer
slot
middle
ladder
section
top
ladder
section
3
4
7
5
ground
7