Installation Instructions
Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
12
Operator's Manual
LOCKDOWN WIDE 1-MAN Ladder Stand
FIGURE 12
FIGURE 11
FIGURE 12A
29
34
27
10
22
10
46
22
44
28
31
11
19
17. Assemble the adjustable shooting rail knobs (31) and
bolts (28) to the armrests (11, 12) in the slots provid-
ed. To assemble the shooting rest, connect the shoot-
ing rail (10) over the ends of both the shooting rail
braces (22) and secure using two 1/4-20 x 1-1/4 IN
bolts (46) and two 1/4-20 nuts (44). SEE FIGURE 11
18. The shooting rail assembly connects to the armrest as
shown in Figure 12. Use the two M6 x 80 MM bolts
(34), two yellow spacers (29) and two shooting rail
knobs (27) to connect the two components together.
SEE FIGURE 12 AND 12A
NOTE: The shooting rail is designed to have multiple
congurations. Adjustments can be made to the height by
loosening the knob in the slotted-plate on the armrests, and
moving it either upwards or downward until desired height
is achieved. Once location has been reached re-tighten the
knob to create a rm seat of the shooting rail to rest on. To
move the shooting rail closer to you or further away, use the
three holes drilled into the end of the shooting rail and place
the knob location at the desired setting.