Installation Instructions

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
11
Operator's Manual
LOCKDOWN WIDE 1-MAN Ladder Stand
FIGURE 10
FIGURE 9
FIGURE 10A
8
40
38
25
16
44
3
44
43
20
6
2
44
25
29
6
25
45
14. Connect the rst ladder section (3) to the platform
rails (8) with a 1/4-20 x 1-3/4 IN bolt (40) and a 1/4-20
nut (44) on each side of the ladder. Once connected,
attach the free end of the platform braces (16) to the
outer edge of the ladder section (3) with a 1/4-20 x
2-1/4 IN bolt (38), one yellow washer (25) and a 1/4-20
nut (44) on each side. SEE FIGURE 9
15. Attach the top ladder step (20) to the platform rails
(8) with two 1/4-20 x 3 IN bolts (43) and two 1/4-20
nuts (44). SEE FIGURE 10
16. The footrest (6) is secured to the platform rails (8)
using two 1/4-20 x 2-3/4 IN bolts (45), four yellow
washers (25), two yellow spacers (29) and two 1/4-20
nuts (44). SEE FIGURE 10 AND FIGURE 10A
NOTE: The order of the hardware is necessary to
allow for the seat to properly function.
8