Installation Instructions

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
9
Operator's Manual
LOCKDOWN 2-MAN Ladder Stand
FIGURE 5
FIGURE 6
11
16
5. Once the seat support (13) is properly assembled, take the seat
assembly (16), using the hardware: 1/4 -20 X 3-3/4 IN bolts (25),
yellow plastic washers (20), plastic spacers (19) and 1/4-20 nuts
(36) assemble as shown in FIGURES 5 AND 5A. The hardware
order in this step is imperative for proper assembly and function.
6. Now with seat assembly secured, take the backrest support
(15) and feed it through sleeve in seat as shown in FIGURE 6.
After back support (15) has been fed through seat assembly
(16), attach to rear of armrests (10 & 11) with four 1/4-20 X 2-1/2
IN bolts (32) and 1/4-20 nuts (36) as shown in FIGURE 6. This will
require the seat bottom to be ipped up to relieve tension on
seat assembly.
13
20
16
15
36
32
10
FIGURE 5A
25
20
20
36
19