Installation Instructions

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
8
Operator's Manual
LOCKDOWN 21 1-MAN Ladder Stand
22
7
6
26
34
8
26
5
30
35
63
7
34
FIGURE 3
FIGURE 4
6. Slide the TearTu mesh backrest (22) onto the rear seat supports
(6,7) and keep towards the top. SEE FIGURE 4.
7. Attach the backrest spreader (8) to the top most part of the rear
seat supports (6,7) using two 1/4-20 X 1-1/2 IN bolts (26) and 1/4
IN ange locknuts (34). SEE FIGURE 4.
NOTE: Backrest spreader (8) must be orientated to the underside
of the rear seat supports (6,7), with mounting brackets on the
outside.
4. Attach the right rear seat support (7) and the left rear seat support
(6) to the underside of the rear platform (3) using four 5/16-18 x
2-1/4 IN bolts (30) and 5/16 IN locknuts (35). SEE FIGURE 3.
NOTE: The seat mounting brackets need to be orientated so they
are aligned to the outer edge of the corresponding rear seat
support.
5. Attach the upper tree blade (5) to the lower set of holes on the
rear seat supports (6,7) using four 1/4-20 X 1-1/2 IN bolts (26) and
1/4 IN ange locknuts (34). SEE FIGURE 3.