Installation Instructions

Operator's Manual
LOCKDOWN 21 2-MAN Ladder Stand
Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
8
29
5
35
34
26
6
2
26
7
34
23
6
FIGURE 3
FIGURE 4
5. Slide the TearTu
™
mesh backrest (23) onto the rear seat supports
(6) and keep towards the top. SEE FIGURE 4.
NOTE: The hook and loop attachment strips on the top and
bottom of the mesh should face backwards and the strips on the
left and right sides will face forwards.
6. Attach the backrest spreader (7) to the top most part of the rear
seat supports (6) using two 1/4-20 X 1-1/2 IN bolts (26) and 1/4 IN
ange locknuts (34). SEE FIGURE 4.
NOTE: Backrest spreader (7) must be orientated to the underside
of the rear seat supports (6), with mounting brackets on the
outside.
3. Attach the two rear seat supports (6) to the underside of the rear
platform (2) using four 5/16 x 18 x 2-1/4 IN bolts (29) and 5/16 IN
locknuts (35). SEE FIGURE 3.
4. Attach the upper tree blade (5) to the lower set of bolt holes on
the rear seat supports (6) using four 1/4-20 X 1-1/2 IN bolts (26)
and 1/4 IN ange locknuts (34). SEE FIGURE 3.