Installation Instructions

Operator’s Manual
18’ 2-Man Ladder Stand
Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
9
11. Slide the ends of the oset ladder tubes (5) into the top
ladder section (11) and secure with two lockpins (18).
SEE FIGURES 7.
NOTE: The top ladder section has bolt holes on the outside
below the top ladder rung.
12. Attach the two support braces (9) to the outside edge of
the top ladder sections (11) using two 5/16-18 x 2-1/4 IN
bolts (20) and locknuts (21). SEE FIGURE 7.
FIGURE 7
FIGURE 8
11
18
21
20
13. Assemble the two remaining ladder sections (17) to the top
ladder section (11) and assembled platform, with the stand
laying on the ground, using four lockpins (18) at the points
where the ladder sections slide together. SEE FIGURE 8.
11
ground
17
22
18