Installation Instructions

Operator’s Manual
18’ 2-Man Ladder Stand
Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
7
4. Insert the crimped end of the oset ladder tubes (5) into
the bottom of the two side frame tubes (8) on either side of
the foot platform and secure using two 5/16-18 x 2-1/4 IN
bolts (20) and locknuts (21). SEE FIGURE 3.
NOTE: Make sure bolts pass through both the oset
ladder tubes and the side frame tubes.
5. Attach the ladder step tube (4) to the oset ladder tubes (5)
using two 5/16-18 x 2-1/4 IN bolts (20) and locknuts (21).
SEE FIGURE 3.
6. Attach the tree blade (14) to the platform frame tubes (6)
using two 5/16-18 x 2-1/4 IN bolts (20) and locknuts (21).
SEE FIGURE 4.
7. Attach both armrests (3) to the outside edges of the seat
platform (12) using four 5/16-18 x 2 IN bolts (19) and
locknuts (21). SEE FIGURE 4.
8. Attach the backrest (15) to the top of the two armrests (3)
using four 5/16-18 x 2 IN bolts (19) and locknuts (21). SEE
FIGURE 4.
NOTE: The tabs on both ends of the backrest need to
be orientated on the lower side of the backrest when
attached.
5
8
21
20
4
20
21
14
20
21
6
3
19
12
15
19
FIGURE 3
FIGURE 4