Installation Instructions

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
8
Operator's Manual
BIG FOOT XC Hang-On Stand
FIGURE 3
FIGURE 4
FIGURE 4A
11
18
17
7
3
16
9
15
6
3. Bolt cables (7) onto platform (3) using two 5/16-18 X 1-1/2 IN bolts
(11), two washers (18) and two 5/16-18 nuts (17). SEE FIGURE 3.
4. Attach the footrest (6) onto the platform (3) using two 1/4-20 X
2-1/4 IN bolts (15), two plastic washers (9) and two 1/4-20 nuts (16).
SEE FIGURE 4.
Note: You must now tighten all nut and bolt assemblies. Be sure
not to over-tighten or crush tubing while tightening!
5. Take the seat pad (19) and slide the sleeve of the front of the pad
onto the seat assembly (4). Secure them together using the
attached clips. At this time, you will also want to connect the
backrest pad to the tree, at the desired height, and securing with
the connected clips as well.
6. Connect the armrest pads (21) to the armrests (5) by folding the
pad over the armrests and securing with the hook and loop closure.
3