Installation Instructions

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
7
Operator's Manual
BIG FOOT XC Hang-On Stand
All assembly must be done in this order at ground level
before use.
Do not remove labels/warnings from product, they are
there for your safety.
Recommended for adult use only.
ASSEMBLY INSTRUCTIONS
TOOLS NEEDED: two 1/2 IN wrenches
two 7/16 IN wrenches
FIGURE 1
FIGURE 2
FIGURE 1A
14
9
9
9
16
4
5
16
12
NOTE: When selecting a tree to install the treestand in, never use
a treestand on a dead, leaning, diseased or loose barked tree, or
a utility pole. Always avoid electrical power lines.
1. Attach the seat assembly (4) to the seat posts (1), using 1/4-20 x
2-1/2 IN bolts (14), six yellow washers (9) and two 1/4-20 nuts (16).
SEE FIGURE 1 AND 1A.
4
1
2. Attach both armrests (5) to seat assembly (4) using two 1/4-20 X 2
IN bolts (12) and two 1/4-20 nuts (16) on each armrest.
SEE FIGURE 2.