Installation Instructions

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
12
Operator's Manual
BIG FOOT XC Hang-On Stand
THREADING THE FLOAT BUCKLE
Always check the condition of your Big Foot strap before use. If strap
becomes twisted or if you need to replace a worn or damaged strap,
make sure to follow these instruction to ensure proper assembly.
1. Hold oat buckle so warning tag faces upward. SEE FIGURE 11.
2. Feed end tail of strap up through the bottom of the oat buckle on
the sewn loop side of the roller bar. SEE FIGURE 12.
NOTE: Smooth side of end tail must face sewn loop.
3. Feed end tail over roller bar and down through oat buckle.
SEE FIGURE 13.
4. Pull end tail away from oat buckle. SEE FIGURE 13.
!
FIGURE 11
!
warning tag
oat buckle
sewn loop
!
sewn loop
roller bar
end tail
of strap
smooth side
FIGURE 12
FIGURE 13