Installation Instructions

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5

Operator's Manual

BIG FOOT XC Hang-On Stand

WARNING

Platform must be folded up to remove stand! This allows

slack in strap for removal.

TREE ATTACHMENT INSTRUCTIONS

1. At desired height, attach by following instructions - a,b,c,d,e,f.

NOTE: Stand should be attached to tree with platform folded in

an upright position!

a. Lengthen strap by pulling oat buckle away from strap - this will

allow strap to slide around oat buckle roller bar.

b. With the sewn loop of the long side strap attached correctly, take

sewn loop on oat buckle end and wrap around tree. Be sure the strap

is even and at the same level all the way around the tree. Also, be

sure there are no twists in the strap. Connect sewn loop to opposite

side of stand by correctly looping over opposite oval mount. Be

absolutely sure both sewn loops are securely attached and can not

come o. SEE CRITICAL STRAP ATTACHMENT INSTRUCTIONS.

c. Pull on excess end of strap rmly - snugging up stand to tree.

SEE FIGURE 8.

NOTE: Platform must be folded up while doing this.

d. While platform is still folded up, push treestand in a downward

direction to further tighten strap. SEE FIGURE 9.

e. Once securely attached, pivot the platform down. This lever-action

will snug stand up tight to tree to prevent any shifting. Redo as

necessary to accomplish a snug stand-to-tree t. All four contact

bars must be touching tree! SEE FIGURE 10.

f. The tension on strap will not allow any slippage due to roller bar

tension of buckle. Proper installation should be checked prior to

stepping onto platform to ensure safety.

2. Before stepping down onto center of stand platform, be sure it is secured

properly and is tight against tree with all four contact bars touching tree!

3. Carefully step onto stand platform to be sure you have a solid feel

against tree and platform is level. Seat folds down for sitting and tips

back for standing.

NOTE: To remove stand, fold platform back up and pull on buckle hand

strap to release tension on roller bar.

FIGURE 10

platform

seat

oat buckle

FIGURE 8

excess end

of strap

oat buckle

FIGURE 9