Installation Guide

TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
TOOL NEEDED FOR SECURING TO WALL: POWER DRILL (NOT INCLUDED)
To order replacement parts at no cost to you, email [e-mail],
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com
STEP 1
1. Screw 6 cam bolts (A) into pre-threaded holes on left side panel (7).
2. Attach drawer slides attach to left side panel (G) to left side panel (7) by inserting 4 screws (K) through
holes on drawer slides attach to left side panel (G), then tighten to left side panel (7).
STEP 2
1. Screw 6 cam bolts (A) into pre-threaded holes on right side panel (8).
2. Attach drawer slides attach to right side panel (I) to right side panel (8) by inserting 4 screws (K)
through holes on drawer slides attach to right side panel (I), then tighten to right side panel (8).